Using your Magnilink Magnetic Cable is easy and satisfying — but to get the best performance and durability, a few simple steps and precautions go a long way. Here’s how to use your cable like a pro.
📦 What’s Included?
Depending on the model you ordered, your cable will come with either:
-
A pack of 2 USB-C magnetic tips
-
Or a set of 3 magnetic tips: USB-C, Micro-USB, and iOS (Lightning)
These tips are reusable, interchangeable, and designed for long-term use with all your devices.
🧼 Step 1 – Clean Your Charging Port
Before inserting the tip into your phone or device, it’s important to clean the charging port.
Dust, lint, or debris inside your port can:
-
Cause weak magnetic hold
-
Lead to tips falling out
-
Or even cause a short-circuit
🧰 Use an air spray or a wooden toothpick to gently remove any dirt.
⚠️ Never use metal tools — they could damage your port!
🔌 Step 2 – Insert the Magnetic Tip
Gently insert the magnetic tip into your device’s charging port. Make sure:
-
The tip sits flush and firmly
-
There’s no wiggle or looseness
You can leave the tip inside your device — it’s safe and won’t harm your phone.
✅ Step 3 – You’re Good to Go!
Now just bring your cable close — it’ll snap into place magnetically.
Enjoy instant charging without fumbling with cables!
(That wasn’t too complicated, was it?)
📝 Tips to Maximize the Life of Your Cable
🧲 1. Leave the Tip In
You can safely leave the magnetic tip inside your device — it won’t damage your port and actually helps protect it from wear and tear.
↘️ 2. Disconnect Gently
To unplug the cable, use a diagonal motion rather than pulling straight.
This reduces stress on the connector and prevents it from bending or breaking.
❌ Don’t yank it out vertically — this can weaken or damage the connector over time.
💥 3. Protect Against Drops
The magnetic tips are made with precision — but magnet material is more fragile than standard metal.
-
A hard drop can damage the tip.
-
If it becomes chipped or cracked, stop using it and replace the tip.
🧹 4. Clean Magnets Periodically
If you notice that the magnet feels weaker over time, check for dust or debris on either side of the connection (cable head or tip).
-
Use a soft cloth or cotton swab with isopropyl alcohol to clean it.
-
Avoid moisture or liquid cleaners.